China Standard Plastic PA66 Pulley with Double Bearing chain pulley

Product Description

Plastic Pa66 Pulley with double bearing

Mc nylon, means monomer casting nylon, is a kind of engineering plastics used in comprehensive industries, has been applied almost every industrial field.
The caprolactam monomer is first melted, and added catalyst, then poured it inside moulds at atmosphere pressure so as to shape in different castings, such as: Rod, plate, tube. The molecule weight of mc nylon can reach 70, 000-100, 000/mol, 3 times than pa6/pa66. Its mechanical properties are much higher than other nylon materials, such as: Pa6/pa66. Mc nylon plays a more and more important role in the material list recommended by our country.

Since the end of 1980’s, HangZhou engineering plastics industireis company has devoting herself on developing the technology of mc nylon modification, greatly extended the applications in different industries. Basing on the mc nylon, reinforced with variety of additives during the reaction, such as lubricant, molybdenum disulfide, graphite glass fiber, carbon fiber etc, to improve the properties, higher performance of wear-resistance, corrosion-resistance, self-lubrication, vibration-absorption, noise-absorption. At the same time, as the technics and structure of the moulds is quite simple, so that it can be manufactured in lower cost, becomes the ideal substitutes of bronze, stainless steel, babbitt alloy, ptfe and so on.

Oil nylon (green)
Oil nylon(green)is the new engineering plastics that developed by HangZhou engineering plastics industireis company in the later 1980’s by importing the advanced technology from nylacast co., ltd, uk, was the first authentic lubricating nylon that builds the liquid lubricant system during the processing stage, which makes its coefficient of friction is 50% lower than the general pa6 or pa66, the wear-resistance is 10 times than the general ones. Oil nylon is specially developed for the parts of non-self-lubrication, heavy-loading and low-speed-running, which obviously resulted in a substantial increase in bearing life- 5 times that of general pa6 and 25 times that of phosphor bronze! The lubricant contained within the material will not drain, adsorb or dry out and never needs replenishment. The uniform distribution of the lubricant throughout the product guarantees the constant performance of the parts over the whole service life and improvements in rate of wear, sliding frictional properties, abrasion resistance and stick slip performance, which are just a few of the benefits offered by this material. Oil nylon has been successful in considerable enlarging the application of nylon in many industries and specifically for some un-lubricated running parts.

Other casting nylon:
Oil nylon + carbon (black)
Oil nylon added carbon, has the very compact and crystal structure, which is better than the general casting nylon in the performance of high mechanical strength, wear-resistance, anti-aging, uv resistance and so on. It is suitable for making the bearing and other wear mechanical parts.

Oil mc901(blue)
This improved mc nylon, has striking blue color, which is better than general pa6/pa66 in the performance of toughness, flexibility, fatigue-resistance and so on. It is the perfect material of gear, gear bar, transmission gear and so on.

Mc nylon + mso2(light black)
Mc nylon added mso2 can remain the impact-resistance and fatigue-resistance of casting nylon, as well as it can improve the loading capacity and wear-resistance. It has a wide application in making gear, bearing, planet gear, seal circle and so on.

Property Item No. Unit MC Nylon (Natural) Oil Nylon+Carbon    (Black) Oil Nylon (Green) MC90 (Blue) MCNylon+MSO2(Light Black)
Mechanical Properties 1 Density g/cm3 1.15 1.15 1.135 1.15 1.16
2 Water absorption   (23ºCin air) % 1.8-2.0 1.8-2.0 2 2.3 2.4
3 Tensile strength MPa 89 75.3 70 81 78
4 Tensile strain at break % 29 22.7 25 35 25
5 Compressive stress   (at 2%nominal strain) MPa 51 51 43 47 49
6 Charpy impact strength (unnotched) KJ/m 2 No brak No break ≥50 No BK No break
7 Charpy impact strength (notched) KJ/m 2 ≥5.7 ≥6.4 4 3.5 3.5
8 Tensile modulus of elasticity MPa 3190 3130 3000 3200 3300
9 Ball indentation hardness N/mm 2 164 150 145 160 160
  10 Rockwell hardness M88 M87 M82 M85 M84

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: PA
Size: According to Drawing or Sample
Color: Natural, White, Black, Green, Blue
Tooling: CNC Lathe
Transport Package: Packing in Paper Carton and Wooden Pallet
Specification: RoHS
Customization:
Available

|

Customized Request

plastic pulley

Can plastic pulleys withstand exposure to environmental conditions?

Plastic pulleys are designed to withstand exposure to various environmental conditions. Here’s a detailed explanation:

1. Moisture and Humidity:

Plastic pulleys are typically made from materials that are resistant to moisture and humidity. They have inherent properties that prevent water absorption, reducing the risk of swelling, warping, or degradation. This makes plastic pulleys suitable for use in environments with high humidity or where occasional exposure to moisture is expected, such as garages or outdoor applications.

2. Temperature Extremes:

Plastic pulleys exhibit different levels of temperature resistance depending on the specific material used. Many plastic pulleys are designed to withstand a wide range of temperatures, including both high and low extremes. For example, some pulleys made from engineering-grade plastics can operate reliably in temperatures ranging from -40°C to 100°C (-40°F to 212°F). However, it’s important to check the manufacturer’s specifications for temperature limits and choose pulleys that are suitable for the specific environment in which they will be used.

3. UV Exposure:

Extended exposure to ultraviolet (UV) radiation from the sun can potentially degrade certain types of plastics. However, many plastic pulleys are manufactured with UV stabilizers or additives that provide resistance to UV radiation. These additives help protect the plastic material from UV-induced degradation, such as discoloration, brittleness, or loss of mechanical properties. Plastic pulleys with UV resistance are commonly used in outdoor applications where they are exposed to direct sunlight.

4. Chemical Resistance:

The chemical resistance of plastic pulleys varies depending on the specific material used. Some plastics, such as polypropylene (PP) or polyethylene (PE), have excellent chemical resistance and can withstand exposure to a wide range of chemicals, including solvents, acids, and alkalis. However, other plastics may be more susceptible to chemical attack. It’s important to consider the specific chemicals present in the environment and select plastic pulleys that are compatible and resistant to those substances.

5. Dust and Dirt:

Plastic pulleys are generally resistant to dust and dirt accumulation. Their smooth surfaces and low-friction properties make it difficult for particles to adhere to the pulley’s surface. This reduces the risk of debris interfering with the pulley’s movement or causing excessive wear. However, periodic cleaning may still be necessary to ensure optimal performance and prevent any buildup of contaminants that could affect the pulley’s operation.

6. Impact and Vibration:

Plastic pulleys are designed to withstand the impact and vibration commonly encountered in various applications. The plastic materials used in their construction offer good impact resistance, absorbing and dispersing energy to prevent damage or failure. Additionally, plastic pulleys can dampen vibrations, reducing the strain on the pulley and other components of the system. However, it’s important to choose pulleys with the appropriate material properties and consider the specific impact and vibration levels of the application.

7. Saltwater and Corrosive Environments:

In environments where saltwater or corrosive substances are present, it’s crucial to select plastic pulleys that are specifically designed for such conditions. Certain plastics, such as acetal (POM) or polyvinyl chloride (PVC), offer good resistance to saltwater and corrosion. These materials are commonly used in marine or coastal applications where the pulleys may be exposed to saltwater spray or corrosive atmospheres.

While plastic pulleys are generally designed to withstand exposure to environmental conditions, it’s important to consider the specific requirements of the application and choose pulleys that are suitable for the intended environment. Manufacturers often provide guidance on the recommended materials and specifications for plastic pulleys based on their environmental resistance properties.

plastic pulley

What role do plastic pulleys play in automotive engines and accessory systems?

Plastic pulleys play an essential role in automotive engines and accessory systems. Here’s a detailed explanation of the role of plastic pulleys in these applications:

1. Belt Driven Systems:

In automotive engines, plastic pulleys are commonly used in belt-driven systems. These systems include components such as the alternator, power steering pump, air conditioning compressor, water pump, and various accessory drives. Plastic pulleys are used as the guiding and tensioning components for the belts that drive these systems. They help maintain proper belt tension, ensure smooth operation, and facilitate the transfer of power from the engine to the various accessory components.

2. Lightweight Design:

Plastic pulleys offer the advantage of being lightweight compared to their metal counterparts. This lightweight design contributes to overall weight reduction in the vehicle, which is crucial for improving fuel efficiency and reducing emissions. By using plastic pulleys in automotive engines and accessory systems, manufacturers can achieve weight savings without compromising the strength and durability required for reliable operation.

3. Low Friction and Efficiency:

Plastic pulleys are designed to have low friction surfaces. This characteristic reduces the resistance encountered by the belts during operation, resulting in improved efficiency. The reduced friction helps optimize the power transfer from the engine to the accessory systems, ensuring that energy is not wasted and maximizing the overall efficiency of the vehicle. The use of plastic pulleys helps minimize energy losses and contributes to the performance and fuel economy of the automotive engine.

4. Corrosion Resistance:

Automotive engines and accessory systems are exposed to various environmental conditions, including moisture, heat, and chemicals. Plastic pulleys offer excellent resistance to corrosion, which is particularly beneficial in these demanding environments. Unlike metal pulleys that may rust or corrode, plastic pulleys remain unaffected by moisture or chemicals. This corrosion resistance ensures long-lasting performance and reduces the need for frequent replacements, contributing to the reliability and longevity of automotive engines and accessory systems.

5. Noise and Vibration Damping:

Plastic pulleys have inherent damping properties that help reduce noise and vibration in automotive engines and accessory systems. The damping effect of plastic materials absorbs vibrations generated during belt operation, resulting in smoother and quieter system performance. This is important for improving the overall driving experience and reducing the noise levels inside the vehicle cabin. Plastic pulleys help minimize noise and vibration, contributing to user comfort and the overall quality of the vehicle.

6. Design Flexibility:

Plastic pulleys offer a high degree of design flexibility, allowing for precise customization to match the specific requirements of automotive engines and accessory systems. They can be molded into various shapes, sizes, and configurations, enabling efficient integration into different engine layouts and space constraints. Plastic pulleys can incorporate features such as grooves, flanges, or mounting options directly into the design, ensuring optimal belt engagement and alignment. This design flexibility helps optimize the performance and reliability of automotive engines and accessory systems.

7. Cost-Effectiveness:

Plastic pulleys are generally cost-effective compared to their metal counterparts. The manufacturing process for plastic pulleys is typically less complex and less expensive, resulting in lower production costs. This cost advantage makes plastic pulleys a preferred choice in automotive applications where multiple pulleys are required, such as in serpentine belt systems. Plastic pulleys offer a balance between performance, durability, and affordability, contributing to the cost-effectiveness of automotive engines and accessory systems.

In summary, plastic pulleys play a vital role in automotive engines and accessory systems by guiding and tensioning belts, providing lightweight design, reducing friction and improving efficiency, offering corrosion resistance, damping noise and vibration, providing design flexibility, and delivering cost-effectiveness. Their contributions to these systems result in better performance, fuel efficiency, reliability, and overall driving experience in vehicles.

plastic pulley

What are the benefits of using plastic pulleys in various systems?

Plastic pulleys offer several benefits when used in various systems. Here’s a detailed explanation of the advantages of using plastic pulleys:

1. Lightweight:

Plastic pulleys are lightweight compared to metal pulleys. This characteristic is particularly advantageous in systems where weight reduction is desired, such as in automotive applications or portable equipment. The lightweight nature of plastic pulleys helps minimize the overall weight of the system, resulting in improved energy efficiency, reduced inertia, and easier handling and installation.

2. Low Friction:

Plastic pulleys are designed to have low friction surfaces. This feature reduces the resistance encountered by belts or cables during operation, resulting in smoother movement and improved efficiency. Low friction also helps minimize wear and tear on the belt or cable, extending their lifespan and reducing maintenance requirements. Additionally, the reduced friction contributes to energy savings and quieter operation of the system.

3. Corrosion Resistance:

Plastic pulleys offer excellent resistance to corrosion. Unlike metal pulleys that may rust or corrode when exposed to moisture or chemicals, plastic pulleys remain unaffected by such corrosive elements. This makes plastic pulleys a suitable choice for systems operating in outdoor or harsh environments, where exposure to moisture, chemicals, or saltwater is common. The corrosion resistance of plastic pulleys ensures long-lasting performance and reduces the need for frequent replacements.

4. Noise and Vibration Damping:

Plastic pulleys have inherent damping properties that help reduce noise and vibration in systems. The damping effect of plastic materials absorbs vibrations generated during belt or cable operation, resulting in smoother and quieter system performance. This is particularly beneficial in applications where noise reduction is important, such as in office equipment, household appliances, or precision machinery.

5. Design Flexibility:

Plastic pulleys offer a high degree of design flexibility. They can be molded into various shapes, sizes, and configurations, allowing for precise customization to match the specific requirements of the system. Plastic pulleys can incorporate features such as flanges, grooves, or mounting options directly into the design, ensuring optimal belt or cable engagement and alignment. This design flexibility enables efficient integration of the pulleys into different systems, improving overall performance and reliability.

6. Electrical Insulation:

Plastic pulleys provide electrical insulation properties. Unlike metal pulleys, which conduct electricity and can cause electrical interference or safety hazards, plastic pulleys offer insulation. This makes them suitable for use in systems where electrical conductivity needs to be avoided or isolated, such as in electronic equipment, robotics, or automation systems.

7. Cost-Effectiveness:

Plastic pulleys are generally more cost-effective compared to pulleys made from other materials, such as metal or ceramic. The manufacturing process for plastic pulleys is typically less complex and less expensive, resulting in lower production costs. This cost advantage makes plastic pulleys a cost-effective choice for various systems, especially in applications where multiple pulleys are required. They offer a balance between performance, durability, and affordability.

In summary, the benefits of using plastic pulleys in various systems include their lightweight nature, low friction, corrosion resistance, noise and vibration damping properties, design flexibility, electrical insulation, and cost-effectiveness. These advantages make plastic pulleys a popular choice in a wide range of industries and applications, contributing to improved system performance, durability, and overall efficiency.

China Standard Plastic PA66 Pulley with Double Bearing   chain pulleyChina Standard Plastic PA66 Pulley with Double Bearing   chain pulley
editor by CX

2024-05-17